---
title: "Clinical ADaM Derivations with sasif"
output: rmarkdown::html_vignette
vignette: >
  %\VignetteIndexEntry{Clinical ADaM Derivations with sasif}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, include = FALSE}
knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)
```

## Introduction

Clinical programmers working in R often face a common challenge when migrating 
from SAS: in SAS, a single `IF ... THEN DO` block can assign **multiple variables** 
at once under one condition. In R, traditional approaches like `case_when()` or 
`fifelse()` force you to **repeat the same condition for every variable** — increasing 
QC risk and reducing readability.

`sasif` solves this by bringing SAS-style `IF / ELSE IF / ELSE` control flow 
into R's `data.table` ecosystem. One condition governs all assignments in a block — 
just like SAS.

This vignette walks through three real-world ADaM derivation scenarios:

1. **ADSL** — Population flags and treatment variables
2. **ADLB** — Laboratory value categorisation
3. **ADAE** — Treatment-emergent adverse event flags

---

## Setup

```{r setup}
library(sasif)
library(data.table)
```

---

## Scenario 1 — ADSL: Population Flags

### The Problem

In a typical ADSL derivation, when a subject is in the treatment arm, 
multiple variables need to be assigned simultaneously — population flags, 
treatment labels, numeric codes, and treatment dates.

In traditional R, every variable requires its own repeated condition:

```{r adsl_problem, eval=FALSE}
# ❌ Traditional R — condition repeated for every variable
adsl <- adsl %>% mutate(
  SAFFL   = case_when(ACTARMCD == "TRTA" ~ "Y"),
  SAFFLN  = case_when(ACTARMCD == "TRTA" ~ 1),
  TRT01A  = case_when(ACTARMCD == "TRTA" ~ ACTARMCD),
  TRT01AN = case_when(ACTARMCD == "TRTA" ~ 1),
  ITTFL   = case_when(ACTARMCD == "TRTA" ~ "Y"),
  FASFL   = case_when(ACTARMCD == "TRTA" ~ "Y"),
  RANDFL  = case_when(ACTARMCD == "TRTA" ~ "Y"),
  PPFL    = case_when(ACTARMCD == "TRTA" ~ "Y")
  # Same condition written 8 times — high QC risk
)
```

If the condition ever changes, you must update it in 8 places. Miss one and 
your derivation silently diverges — a real risk in regulated environments.

### The sasif Solution

```{r adsl_solution}
# Create sample ADSL data
adsl <- data.table(
  USUBJID  = c("S01", "S02", "S03", "S04"),
  ACTARMCD = c("TRTA", "TRTA", "SCRNFAIL", "TRTA"),
  RFSTDTC  = c("2024-01-10", "2024-01-15", NA, "2024-01-20"),
  RFENDTC  = c("2024-06-10", "2024-06-15", NA, "2024-06-20")
)

# ✅ sasif — condition written ONCE, governs all assignments
ADSL <- data_step(adsl,
  if_do(ACTARMCD == "TRTA",
    SAFFL   = "Y",
    SAFFLN  = 1,
    TRT01A  = "Treatment A",
    TRT01AN = 1,
    TRTSDT  = as.Date(RFSTDTC, "%Y-%m-%d"),
    TRTEDT  = as.Date(RFENDTC, "%Y-%m-%d"),
    ITTFL   = "Y",
    FASFL   = "Y",
    RANDFL  = "Y",
    PPFL    = "Y"
  )
)

print(ADSL[, .(USUBJID, ACTARMCD, SAFFL, TRT01A, TRT01AN, ITTFL, FASFL)])
```

All 10 variables are derived from a single condition block. Clean, readable, 
and audit-friendly — exactly like SAS `IF ... THEN DO`.

---

## Scenario 2 — ADSL: Multi-Arm Treatment Assignment (IF / ELSE IF / ELSE)

When a study has multiple treatment arms, use the full IF / ELSE IF / ELSE 
chain. The first matching condition wins — all others are skipped:

```{r adsl_multiarm}
adsl2 <- data.table(
  USUBJID  = c("S01", "S02", "S03", "S04", "S05"),
  ACTARMCD = c("TRTA", "TRTB", "TRTC", "TRTA", "TRTB"),
  AGE      = c(35, 52, 67, 44, 58)
)

ADSL2 <- data_step(adsl2,
  if_do(ACTARMCD == "TRTA",
    TRT01A  = "Treatment A",
    TRT01AN = 1
  ),
  else_if_do(ACTARMCD == "TRTB",
    TRT01A  = "Treatment B",
    TRT01AN = 2
  ),
  else_do(
    TRT01A  = "Placebo",
    TRT01AN = 99
  )
)

print(ADSL2[, .(USUBJID, ACTARMCD, TRT01A, TRT01AN)])
```

Notice that both `TRT01A` (character label) and `TRT01AN` (numeric code) are 
derived together under each condition — no repetition needed.

---

## Scenario 3 — ADSL: Age Categorisation

Derive both the age category label and its numeric code in one chain:

```{r adsl_agecat}
adsl3 <- data.table(
  USUBJID = c("S01", "S02", "S03", "S04", "S05"),
  AGE     = c(32, 45, 58, 71, 80)
)

ADSL3 <- data_step(adsl3,
  if_do(AGE <= 45,
    AGECAT  = "YOUNG",
    AGECATN = 1
  ),
  else_if_do(AGE <= 70,
    AGECAT  = "MIDDLE",
    AGECATN = 2
  ),
  else_do(
    AGECAT  = "OLD",
    AGECATN = 3
  )
)

print(ADSL3[, .(USUBJID, AGE, AGECAT, AGECATN)])
```

---

## Scenario 4 — ADLB: Laboratory Value Categorisation

A common ADaM derivation — categorise lab values as LOW, NORMAL, or HIGH 
based on reference ranges, and derive both the character and numeric 
category together:

```{r adlb_example}
adlb <- data.table(
  USUBJID  = c("S01", "S01", "S02", "S02", "S03"),
  LBTESTCD = c("ALB", "ALB", "ALB", "ALB", "ALB"),
  AVAL     = c(2.8, 4.2, 5.6, 3.5, 1.9),
  ANRLO    = c(3.5, 3.5, 3.5, 3.5, 3.5),
  ANRHI    = c(5.0, 5.0, 5.0, 5.0, 5.0)
)

ADLB <- data_step(adlb,
  if_do(LBTESTCD == "ALB" & AVAL < ANRLO,
    ALBCAT  = "LOW",
    ALBCATN = 1
  ),
  else_if_do(LBTESTCD == "ALB" & AVAL > ANRHI,
    ALBCAT  = "HIGH",
    ALBCATN = 2
  ),
  else_do(
    ALBCAT  = "NORMAL",
    ALBCATN = 3
  )
)

print(ADLB[, .(USUBJID, LBTESTCD, AVAL, ANRLO, ANRHI, ALBCAT, ALBCATN)])
```

Both `ALBCAT` and `ALBCATN` are always consistent — they are derived from 
the same condition, so they can never diverge.

---

## Scenario 5 — ADAE: Treatment-Emergent Flag (TRTEMFL)

Flag adverse events that started on or after the treatment start date:

```{r adae_example}
adae <- data.table(
  USUBJID = c("S01", "S01", "S02", "S02", "S03"),
  AEDECOD = c("Headache", "Nausea", "Fatigue", "Dizziness", "Rash"),
  ASTDT   = as.Date(c("2024-01-15", "2023-12-01",
                       "2024-01-20", "2024-02-10", "2024-01-25")),
  TRTSDT  = as.Date(c("2024-01-10", "2024-01-10",
                       "2024-01-15", "2024-01-15", "2024-01-20")),
  TRTEDT  = as.Date(c("2024-06-10", "2024-06-10",
                       "2024-06-15", "2024-06-15", "2024-06-20"))
)

ADAE <- data_step(adae,
  if_do(ASTDT >= TRTSDT & ASTDT <= TRTEDT,
    TRTEMFL = "Y",
    TRTEMA  = AEDECOD
  )
)

print(ADAE[, .(USUBJID, AEDECOD, ASTDT, TRTSDT, TRTEMFL)])
```

---

## Scenario 6 — DELETE: Remove Unwanted Records

Use `delete_if()` to remove rows explicitly — mirrors the SAS `DELETE` 
statement and makes the intent clear in the code:

```{r delete_example}
adlb2 <- data.table(
  USUBJID  = c("S01", "S02", "S03", "S04", "S05"),
  LBTESTCD = c("ALB", NA,    "ALB", "ALB", NA),
  VISIT    = c("WEEK 1", "WEEK 1", "UNSCHEDULED", "WEEK 2", "WEEK 4"),
  AVAL     = c(4.2, 3.8, 5.1, 4.0, 3.5)
)

ADLB2 <- data_step(adlb2,
  delete_if(is.na(LBTESTCD)),
  delete_if(VISIT == "UNSCHEDULED")
)

print(ADLB2)
```

Only records with valid test codes and scheduled visits are retained.

---

## Scenario 7 — Independent Flags (if_independent)

Use `if_independent()` when conditions are **not** mutually exclusive — 
each condition is evaluated on its own, so multiple flags can apply to 
the same row simultaneously:

```{r if_independent_example}
adsl4 <- data.table(
  USUBJID = c("S01", "S02", "S03", "S04"),
  AGE     = c(30, 68, 45, 72),
  WEIGHTKG = c(48, 72, 55, 43),
  DIABFL  = c("N", "Y", "N", "Y")
)

ADSL4 <- data_step(adsl4,
  if_independent(AGE > 65,       SENIORFL  = "Y"),
  if_independent(WEIGHTKG < 50,  LOWWTFL   = "Y"),
  if_independent(DIABFL == "Y",  COMORBFL  = "Y")
)

print(ADSL4)
```

Subject S04 (age 72, weight 43, diabetic) receives all three flags — 
because all three conditions are TRUE for that row simultaneously.

---

## Key Principle: When to Use Which Function

| Situation | Use |
|-----------|-----|
| First matching condition should win | `if_do()` + `else_if_do()` + `else_do()` |
| Multiple conditions can apply to same row | `if_independent()` |
| Remove rows from dataset | `delete_if()` |

> **Important:** Do not mix `if_do()` chains with `if_independent()` on the 
> same variable. `if_independent()` runs **after** the chain and will overwrite 
> earlier assignments. Use one approach consistently per variable.

---

## Summary

`sasif` brings three key benefits to clinical R programming:

- **One condition, multiple assignments** — no repeated logic, no QC risk of conditions diverging
- **Familiar SAS syntax** — `IF / ELSE IF / ELSE` control flow that clinical programmers already know
- **data.table performance** — fully vectorized, no row loops, scales to millions of rows

For more information, see the [package documentation](https://chandrt23-lang.github.io/sasif).
